Discover the Benefits of Throttle Controllers: The Best Throttle Controller for Your Bronco

By Steven Harrisson, June 23, 2023

Are you looking to improve your Bronco’s performance when venturing off the beaten trail? Sometimes, you might need that extra push that’s not there, especially if you’re hauling heavy at the rear. To deal with this, many off-roaders get a throttle controller. A Ford Bronco throttle controller can help improve your vehicle’s performance when off-roading by giving you more control over the gas pedal.

A Bronco throttle controller works by connecting to your vehicle’s brake pedal and sending a signal to the electronic module on the carburettor of your truck or SUV whenever pressure is applied to it. The module will then close the fuel mixture, causing the engine to respond faster than normal. This allows for better control when driving on rough terrain as well as when accelerating from stops. A Ford Bronco throttle controller is a must-have for off-roaders who want to improve their vehicle’s performance.

EVC X Throttle Controller

photo of a throttle controller behind the wheel
source: sinisteroffroad.com.au

Since there are many brands of Bronco out there, it can be confusing as to which one you should get. There are also different models that come with different features and functions so you need to make sure that you’re getting the right one for your vehicle. 

I recommend you get an EVC X Throttle Controller, as it’s the best one on the market. It comes with a wide range of features and functions that will improve your vehicle’s performance off-road, as well as on-road. This model is easy to install, so you won’t have any trouble getting it up and running in no time at all.

The EVC X Throttle Controller also comes with a 3-year warranty, so if anything happens to it within this period, they’ll replace it for free – no questions asked! I highly recommend this product and I’m sure you’ll be more than satisfied with it. The EVC X Bronco Throttle Controller comes with 9 modes, including: 

  1. Factory Mode – Improves fuel economy when driving normally.
  2. Economy Mode – Increases engine response time while giving better fuel efficiency.
  3. Ultimate Mode – Allows for maximum acceleration, making it ideal for off-roading and racing activities.
  4. Adapt Mode – This allows the throttle controller to choose the best-suited mode for the situation.
  5. Anti-Slip Mode – Enables the throttle controller to work in wet conditions without affecting performance.
  6. Valet Mode – Made for parking. Reduces the throttle response by limiting throttle.
  7. Manual Mode – Lets you control your Bronco’s gas pedal with the throttle controller’s button. This can be used to shift gears on an automatic transmission or as a brake when needed.
  8. Launch Mode – Improve takeoff by allowing for max throttle.
  9. Lock Mode – Allows you to set a desired idle speed with the throttle controller’s button so that it will not fluctuate when off-roading or going up hills. 

I’ve been using one for over 2 years now on my Bronco, and I haven’t had any problems whatsoever. It’s easy to install, works great and is very affordable too.

Installing a Throttle Controller

white throttle controller
source: carmodsaustralia.com.au

Many people are off-put by throttle controllers, simply because they seem daunting to install and dial. However, contrary to what these people think, installing a throttle controller is relatively easy. All you have to do is follow these steps:

  1. Remove the stock throttle cable from your Bronco. It’s located under the hood and can be accessed by unscrewing it from the carburettor housing. Set it aside for now, as you won’t need it anymore. 
  2. Connect the EVC X Throttle Controller to the electronic module on your carburettor. You’ll find two wires there – red and black. The red one is positive while the black one is negative. Make sure that they’re properly connected to their respective wires.
  3. Screw the throttle controller onto the carburettor housing, then replace the stock cable back in place. Make sure that it’s connected properly, as this will ensure that your Bronco doesn’t stall while driving off-road. 
  4. Start up your Bronco and test out the new functionality of your EVC X Throttle Controller by revving up the engine a few times at different speeds. You’ll notice how much better control you have over it now with the throttle controller installed.
  5. That’s it! Your Bronco throttle controller is now installed and ready for use! If you’re looking to improve your Bronco’s performance when off-roading, then I highly recommend that you get one of these. It’ll definitely help make a big difference in the overall performance of your vehicle. 

In Conclusion

Well, there you have it, folks.  I hope this article has helped you make an informed decision when purchasing a new one for your vehicle.  If you’re looking to improve the performance of your Bronco off-road, then the EVC X Throttle Controller is the way to go – guaranteed. You won’t be disappointed with it since it’s been around for years no one has ever had any problems with it.